DTADroid Pro
DTADroid Pro - the dashboard for all DTA S-Series ECUs.
DTADroid Pro is a simple to use dashboard that displays information from any DTA S-Series ECU. The supported values from the ECU are:RPMThrottle %Water TempAir TempManifold PressureLambdaBattery VoltageUndriven Wheel SpeedOil PressureFuel PressureOil TemperatureIn addition, gauges show data from the phone, including GPS speed.DTADroid has been carefully designed to support all device sizes from phones to tablets, with layouts optimised to suit your particular devices screen size. To connect the app to the ECU, you will require:- A 15 pin to 9 pin RS232 cable to connect to the ECUYou will also require either:- A Serial to USB cable. Both FTDI and Prolific chipsets are supported. - A Bluetooth to RS232 adapter, such as the BTLink BTL-577. Please note that there is currently an issue where the BT dongle will not connect if the ECU is plugged in to the dongle. We are working on a fix for this.There are some setup changes required for DTADroid to communicate with the ECU. Please see our Getting Started page at http://dtadroid.com/getting-started/
DTADroid Pro is a simple to use dashboard that displays information from any DTA S-Series ECU. The supported values from the ECU are:RPMThrottle %Water TempAir TempManifold PressureLambdaBattery VoltageUndriven Wheel SpeedOil PressureFuel PressureOil TemperatureIn addition, gauges show data from the phone, including GPS speed.DTADroid has been carefully designed to support all device sizes from phones to tablets, with layouts optimised to suit your particular devices screen size. To connect the app to the ECU, you will require:- A 15 pin to 9 pin RS232 cable to connect to the ECUYou will also require either:- A Serial to USB cable. Both FTDI and Prolific chipsets are supported. - A Bluetooth to RS232 adapter, such as the BTLink BTL-577. Please note that there is currently an issue where the BT dongle will not connect if the ECU is plugged in to the dongle. We are working on a fix for this.There are some setup changes required for DTADroid to communicate with the ECU. Please see our Getting Started page at http://dtadroid.com/getting-started/
Read trusted reviews from application customers
after using free version to test a wire, i immediately bought this to customise my screens. the dropbox bit is hosed but the rest is a-ok. help for customising screens as to what does what would be handy but a bit of trial and error and i'm there. samsung s8 on pie, ugreen prolific serial-usb, cheapo usb-c adapter, s40 running 78.something. some gauges behave oddly such as o2 showing digits correctly but not animating the little red line whereas the one for map is fine and dances about
Great idea, and works well, sometimes. I've had this app for around 2 months now, and it's had its up and downs. Originally I bought a tablet which had a separate power port, so that I could run it in a wired setup (Thought performance would inevitably be better than Bluetooth). App started fine, and worked well momentarily, however it was often crashing with "Unfortunately DTADroid has stopped". Suspected this could be low RAM on the device, so tested with 3 other Android tablets. I ordered the Bluetooth adapter and a new tablet reluctantly as I knew of someone using it without issue. Bit better but still crashes. Usually at inconvenient times like the start line of a rally. The most recent issue which has appeared is when the app is loading up, it says it is unlicensed and asks me to buy it. Immediately disappears when I connect to WiFi again, but isn't ideal if not near a hotspot. Great app/idea with the customization as well. But for £17.50 I'd expect less bugs. Holding out for an update.
Great support, very easy to use.
Excellent app, perfect for DTA systems, top work guys!